AVION Travel Trailers

I might have some. Let me look through the spare stuff. I’m switching all of mine to LED style anyway.

I’m getting ready to redo my fans by installing new ones so none of my old fan parts will be reused. I’ll have a write up on what needed to be done to bring the fans up to modern standards.the original fans were great for their day but these days they are more nostalgia imo than actual well function...

People flip axles all the time for either more ground clearance off road or accommodate a lifted vehicle. Are your axle tubes square? Then you don’t need a mounting plate just undo everything flip the spring to the top of the axle and bolt it back up. Btw use new u bolts. Only time yiu need new spri...

Here’s the link. It’s just one of several. https://www.campingworld.com/vortex-ii-vent-fan-upgrade-59009.html That fan won’t work. The Avion fan and opening are very rounded on the corners and just a tad smaller than 14 inch opening. I fought with my fans and the covers for a year. I finally found ...

Be really careful painting aluminum. You usually need to prep really well as most paints tend to de laminate after a while. You can try a paint less dent repair but aluminum stretches differently than steel. You can try a slide hammert uses a hot glue tips rather than the typical old school screws. ...

It’s most likely normal. They probably cit a big hole as they didn’t want the pipe to get any interference from the frame. You gotta remember that isn’t a area where most people look so ot doesn’t have to be esthetically eye pleasing. I personally wouldnt weld next to a plastic tank. Especially one ...

Mine was stored in a cubby. When you pulled the table out there was a built in cabinet across the front of the trailer. It has a hidden CUNY to the left as you sat inside looking to the front.

I just made a fiberglass mold of mine and made one out of fiberglass. My plastics were cracking. I haven’t finished it yet

I would dent the hell out of mine. I wet a piece of plywood and put a ratchet strap to bend it. Then I glued some foam to the bottom. Holds me up and no dents. I replaced my AC that way.

Could be a nice trailer and they simply are that rare that I say he gets that price. Personally I wouldn’t go any lower in fact I would probably ask more. Agreed on all accounts. The interior looks well enough done. Just hate that Lizard Skin job. I get the impression that this XB has only one heat...