Flexible propane line between regulator and hard pipe
Flexible propane line between regulator and hard pipe
A critter appears to have chewed on the flexible propane line between the regulator and the hard pipe. Has anyone replaced this line, and if so do you have a link to your replacement?
KYAvion
1984 Avion 30R
1984 Avion 30R
Re: Flexible propane line between regulator and hard pipe
Anyone know if the size of the fittings on this hose is correct?
https://www.etrailer.com/Propane/MB-Stu ... BYQAvD_BwE
https://www.etrailer.com/Propane/MB-Stu ... BYQAvD_BwE
KYAvion
1984 Avion 30R
1984 Avion 30R
Re: Flexible propane line between regulator and hard pipe
When I replaced mine, I bought a 3/8" line with 1/2" female connectors on both ends, Took the old pipe, hose and regulator with me to the hardware store, had them cut a pipe to length and thread the ends. Then fit it all together right there. I couldn't reuse the old pipe. We couldn't get the hose off the old pipe.
I needed two fittings to make it all fit up.
I needed two fittings to make it all fit up.
1987 34V
2000 Ford F250
Give a man a fish and you feed him for a day. Teach a man to fish and you feed him for a lifetime.
2000 Ford F250
Give a man a fish and you feed him for a day. Teach a man to fish and you feed him for a lifetime.
-
- Posts: 763
- Joined: Wed Aug 23, 2017 9:01 pm
Re: Flexible propane line between regulator and hard pipe
I would use something like this if I did it again. This one is 3/8". Perhaps they make them in 1/2"
https://www.amazon.com/STAINLESS-BRAIDE ... 82&sr=8-26
" Faith can move mountains, but don't be surprised if God hands you a shovel.”
Silverloaf (Bob)
Dawsonville, GA
1988 30P
Silverloaf (Bob)
Dawsonville, GA
1988 30P
Re: Flexible propane line between regulator and hard pipe
Thank you all for the suggestions.
As far as the stainless braided hose, I suppose a 3/8 to 1/2 half adapter could be used.
As far as the stainless braided hose, I suppose a 3/8 to 1/2 half adapter could be used.
KYAvion
1984 Avion 30R
1984 Avion 30R