Page 1 of 1
Flexible propane line between regulator and hard pipe
Posted: Fri May 29, 2020 9:48 pm
by KYAvion
A critter appears to have chewed on the flexible propane line between the regulator and the hard pipe. Has anyone replaced this line, and if so do you have a link to your replacement?
Re: Flexible propane line between regulator and hard pipe
Posted: Fri May 29, 2020 9:57 pm
by KYAvion
Anyone know if the size of the fittings on this hose is correct?
https://www.etrailer.com/Propane/MB-Stu ... BYQAvD_BwE
Re: Flexible propane line between regulator and hard pipe
Posted: Mon Jun 01, 2020 7:20 pm
by Salty
When I replaced mine, I bought a 3/8" line with 1/2" female connectors on both ends, Took the old pipe, hose and regulator with me to the hardware store, had them cut a pipe to length and thread the ends. Then fit it all together right there. I couldn't reuse the old pipe. We couldn't get the hose off the old pipe.
I needed two fittings to make it all fit up.
Re: Flexible propane line between regulator and hard pipe
Posted: Tue Jun 02, 2020 5:23 pm
by silverloaf
KYAvion wrote: ↑Fri May 29, 2020 9:48 pm
A critter appears to have chewed on the flexible propane line between the regulator and the hard pipe. Has anyone replaced this line, and if so do you have a link to your replacement?
I would use something like this if I did it again. This one is 3/8". Perhaps they make them in 1/2"
https://www.amazon.com/STAINLESS-BRAIDE ... 82&sr=8-26
Re: Flexible propane line between regulator and hard pipe
Posted: Tue Jun 02, 2020 10:18 pm
by KYAvion
Thank you all for the suggestions.
As far as the stainless braided hose, I suppose a 3/8 to 1/2 half adapter could be used.