AVION Travel Trailers

I get voltage on both white wires, the one in pump area and the one in the overhead cabinet. No voltage on black wires at either location using rivet holes but do get voltage on the cabinet white to black. So it appears that the white wires are the 12v Hot. Haven''t hooked the pump up as yet as I pu...

After testing with a circuit tester I found that the results were interesting. First test was from the white wire with the testers' probe inserted down into the yellow wire nut and making sure contact was made with the black wires. Nothing. Second test was with white wire still attached to the teste...

Pump Wiring 3.jpg OK, this is a closeup of the only wires in the pump area right next to the fresh water tank (end of the tank is on the right). There is one red sheathed cable with black and white wires and a separate single black wire. Both black wires are connected to the each other. The yellow ...

I will try to get my phone in a spot for a more clear photo of just what is there tomorrow. Can't get my eyes it there to see.

I am aware of the location of pump and the photo of the wires are indeed in the front left corner. It looks like I am going to have to remove the connector from the two black wires and check them for voltage. Once I determine where I can get voltage from, hopefully the white and black wire in the re...

First, thanks for the reply. My main problem as I see it is that I only have ONE wire so I can't put a meter on, the white one. If one of the black wires in the yellow wire nut goes to the toggle switch by the sink (which I'm thinking it does ), where then is the return wire? Also, I have no access,...

As this is my first post, a little background. We purchase this '68 A-25 at a farm auction in late December 2016 from the original owner. The unit had sat undisturbed inside a farm building since 1976. We are how in the process of going through systems one at a time, testing, repairing or replacing ...