A few “new” things

[Mike]

Yesterday I soldered a connection on the Instrument Signal Panel. Got it working! Today I installed a new water pump and got it running.
However, as I filled the fresh water tank my indicator only registered up to 1/2. As water was coming out the overfill tube the indicator still said 1/2.
I pulled the dipstick and stuck it into a wiskey bottle full of water (emptying the bottle was a great time, by the way) and adjusted the depth randomly. The instrument panel registered 0, 1/4, and 1/2, but never higher.
Has this been an issue with anyone? How did you get it rectified?
Thanks.

[Mike]

Oops, I looked it up in the owners manual, which is original and came with our purchase, and found 0, 1/4, and 1/2 is all the fresh water tank registers.
Man, do I love this thing!
Enjoy the day!

[KYAvion]

Glad you got it figured out. I would have thought a 3/4 reading would have been there too.

You mentioned yours has a dip stick? I believe mine just has sensors in the side of the tank. That's nice that yours is removable. What about the indicators for the water level. What does it look like?

[Mike]

Yes, my “dipstick” is removable. There are four sensors within the grooved portions of the four sides. Each one is a different length.
My curiosity is 4 sensors with only 3 readings. 0, 1/4, and 1/2.
I’m assuming one knows the tank is full as water pours out the overflow and our only knowledge comes when the tank starts losing water to the 1/2 point. Maybe?
The switch on the Instrument Signal Panel needs flipped in order to see the 0, 1/4, or 1/2 illuminate. The switch does not stay “flipped”. It resets.
Here are some pic’s, hopefully.
Mike

53D0FF94-EEEB-46E7-9154-2A662AEF3C2E.jpeg (60.76 KiB) Viewed 9228 times

DC0111D8-48D0-47C6-93B2-5560C92575BF.jpeg (62.59 KiB) Viewed 9228 times

A639A3AE-2694-4871-B1E7-F62BA7359B79.jpeg (51.54 KiB) Viewed 9228 times

115ED5F4-7EE5-4F4D-B250-2C7FCB342CB4.jpeg (42.5 KiB) Viewed 9228 times

28649F83-6F0E-4294-ABFE-27707985ECC7.jpeg (52.97 KiB) Viewed 9228 times

CE2883A7-49EA-4F49-83A6-3E24B5519B36.jpeg (58.75 KiB) Viewed 9228 times

A4A9879B-9C5D-4107-B942-64F8BDA81367.jpeg (39.41 KiB) Viewed 9228 times

6ACA7070-A4B8-4189-A922-B04EA91B20F4.jpeg (42.1 KiB) Viewed 9228 times

6F20065E-C1DF-42A0-BA49-31C563F0EA99.jpeg (57.6 KiB) Viewed 9228 times

[KYAvion]

Great looking trailer. You have a pic of your instrument panel? Maybe the sensor for 0 on the dipstick could be moved to the 3/4 position?

[Mike]

The owners manual states those are the indicators. 0, 1/4, or 1/2. I’ve experimented with it. Once the dipstick senses water the 0 illuminates. As the water volume increases a faint “1/4” starts to show as the “0” starts to fade. Eventually the 0 disappears as the 1/4 becomes dominate. So it goes with 1/2. Pretty cool.
Now I’m looking to solve my toilet holding tank issue at the same time looking for an awning and brackets. Hoping to locate OEM.
Is there a location where I can find parts?
Thanks