Some 12v when on shore power...

[RISK]

It's a 3-way fridge.

fuse 6 is hard to tell from the PO's writing "Power m" it looks like. Fuse 8 is the power jack which has never worked while shore power is plugged in but still works when 110 is disconnected.

I did replace the fuse with a new one at the fridge slot (20A).

thanks,
Ian

[Razorback]

Does anyone have a good electrical system diagram for this model year?

It sounds to me like the converter section is not working, but the charging section is.

[RISK]

Hey Paul,

I’m thinking the same thing about the converter, that it’s probably going out. I flirted with swapping it out a few months ago as I have a brand new 60amp converter but abandoned that as I didn’t want to have to run new wires.

I’ve been doing a bit of research and think I’m going to settle on this unit from Progressive Dynamics as it’s a plug and play solution as it were:

https://www.vintagetrailersupply.com/In ... ts-567.htm

If my fridge still doesn’t work, I’ll start replacing parts before I go down the rabbit hole of a fridge swap out.

Ian

[KYAvion]

Did you try running the fridge off a fused circuit that you know works (i.e., 1,2,3, or 5)?

[Razorback]

Did you try running the fridge off a fused circuit that you know works (i.e., 1,2,3, or 5)?

Great suggestion....

[RISK]

That is a good suggestion.
Will try that and report back. The fridge doesn’t have a light fixture in it but at least I’ll be able to see if I’m getting juice to the 12v at the rear of the fridge.

Thanks,

Ian