Page 1 of 1
Storage Locker Door Rebuild
Posted: Tue Oct 18, 2016 4:29 pm
by Becky B.
The storage locker doors seemed to need some repair, since they couldn't hold screws. The curbside one was completely water logged & the plywood fell apart when I disassembled it. The vinyl coated aluminum sheet on the inside of that door was shot, so I made a new one out of some aluminum sheet that I had left from my belly pan. I used Tempro on all the screws & seams and Parbond around the exterior trim. Here are some pictures that pretty much tell the story:
Re: Storage Locker Door Rebuild
Posted: Tue Oct 18, 2016 4:33 pm
by Becky B.
13770323_1812844088947445_4647817844952961149_n.jpg
Re: Storage Locker Door Rebuild
Posted: Tue Oct 18, 2016 4:35 pm
by Becky B.
13880364_1812844152280772_5765514103195987175_n.jpg
Re: Storage Locker Door Rebuild
Posted: Tue Oct 18, 2016 5:55 pm
by Razorback
Very nice!
Re: Storage Locker Door Rebuild
Posted: Tue Oct 18, 2016 8:56 pm
by KYAvion
I like the plated lining of the water/electric compartment!
Re: Storage Locker Door Rebuild
Posted: Tue Oct 18, 2016 10:35 pm
by Becky B.
KYAvion wrote:I like the plated lining of the water/electric compartment!
Thanks! One time I went to "Alumapalooza" at the Airstream factory & they were selling 2' x 4' pieces of the diamond plate for a buck a piece! I just got 10 of them & figured I'd use them somewhere! It's all gone....wish I hoarded more
Re: Storage Locker Door Rebuild
Posted: Wed Oct 19, 2016 8:52 am
by lockburner2000
Looks good!!!!